Description
We are a design team from China has rich design experience in the field of FPV drone racing. They strive to provide low cost and high performance products for every member in the world who loves flying!
We have upgrated the drone so it comes without battery, charger, receiver or remote control.
Specification
- Wheel base: 145mm
- Motor: 1103 12000KV 1-3S Brushless Motor
- Propeller: Gemfan Hurricane 3018 2-Blade propeller 3018-propeller 2L2R
- Flight controller: F411-15A AIO Flight Controller
Camera: CADDX Camera ANT
1103 12000KV 1-3s Brushless Motor
KV: 12000kv
Lipo cell: 1-3s
Weight: 3.6g
Prop adapter shaft: M2
Bolt thread: PM1.6
Propeller: 3''
4 IN 1 15A BL Heli-S ESC
Input voltage: 3.7~13v DCIN(1-3S LiPo)
Constant current: 15A
Peak current: 17A
BEC output: NO
MCU: 48MHz EFM8BB21F16G
Protocol: DSHOT/ Oneshot/ MultiShot
BLHeli-S Firmware target: S-H-50
Telemetery: No
Current Sensor: No
F411-15A AIO Flight controller
MCU: 100MHz STM32F411CEU6
IMU: MPU 6500(SPI) or ICM20689
Baro: No
Blackbox: No
OSD: AT7456E
2xUarts(1,2)
Bailt in inverter for SBUS input (UARTI-RX)
1XSoftserial supported(S5)
3.7~13v DCIN(1~3SLiPo)
BEC: 5V 2A cont (Max 2.5A)
LDO3.3V: Max 200mA
Battery Voltage sensor: 1:10 (scale 110)
Beta Flight target: MATEKF411
VT 5840 AIR 5.8GHz 40CH
Model: VT5804 AIR
Output power: 25mw/50mw/100mw/200mw/400mw
Input voltage: 6~26v
Output power: 25/50/100/200/400mw Switchable
Frequency: 48 channels
Weight:3g (not including altenna)
Size: 28.8*28.5*3mm
Mounting holes Dimension: 25.5mm*25.5mm
Connector: IPX-E
Video format: NISC/PAL
Device configuration through OSD
PIT Mode Feature
Stable output power and Long transmission distance: 0.5@25mw, 1km@200mw, 5km@400mw(Orignal Antenna)
Device Configuration through OSD
CADDX Camera
Image sensor: 1/3''CMOS Sensor
Horizontal resolution:1200TVL
TV system: NTSC or PAL
MENU: support PICTURE: 16:9 OR 4:3
Synchronization: internal
Electronic shutter: PAL: 1/50~100000
NTSC: 1/60~100,000
S/N ratio: >52dB(AGC OFF)
Video output: CVBS
Lens:1.8mm
Min Lighting: 0.001 Lux@F1.2
Auto Gain control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm
Wide power input: DC3.7-18V
Work temperature: -20~+60
Working humidity: 20% ~80%
Weight: 2g (N.W.)